A tapered pin is a fastener used in mechanical engineering. They are steel rods with one end having a slightly larger diameter than the other. Standard inch-sized tapered pins have a taper on diameter of 1:48 while metric ones have a taper of 1:50. A 1:48 taper means that one end of a 4-foot-long bar will be 1 inch smaller in diameter than the other end, or a 1/4-inch taper over a 1-foot length. Some tapered pins have a male screw thread on the small end that holds the pin in place with a washer and a nut. Other pins are threaded on both ends, on the thick end to pull the pin out with the same nut that holds the pin in place.
Plain & threaded tapper pins are used in joints which carry shear loads & where the absence of play is essential. The plain taper pin is usually drilled and secured with wire. The threaded taper pin is used with a taper pin washer & shear nut or self locking nut. Taper Pins are preferred for parts which are frequently taken apart; also useful for precise constructed tools and gauges which have to be kept in absolute alignment.
Aamaap Fasteners is a Manufacturer of Taper Pins, a semi- permanent cylindrical pin that has a slight taper along its length. Taper pins one end have slightly larger diameter than the other end. The pins are externally and internally threaded which is used to align components which have to be taken apart and reassembled very frequently. Taper pins don not create much wear and tear as compared to cylindrical pins. Standard size taper pins have a taper on diameter of 1:48 while metric taper pin have a taper of 1:50. Some Taper Pins have a male screw thread on the one end that is designed to project through the hole and keep the pin with nut and a washer.
At Aamaap Fasteners we supply various custom and non-custom ranges of Taper Pins. If you are looking for a reliable supplier of Taper Pin, DIC is ready to serve your all kinds of needs.
THREADED TAPER PINS
Threaded Taper Pins are round pins that the diameter uniformly increases along the length of the pin and have a thread at the large end. They can have either an internal or external thread.
Threaded Taper Pins are used in tapered holes where there is only access to one side of the hole. They can be used to aid in critical alignments since the small end of the pin is inserted first it can pass into a hole that is not exactly aligned and as the diameter of the pin increases it forces the two holes to become exactly aligned. Threaded Taper Pins can also be used on assemblies that are expected to be disassembled and reassembled more frequently since they are generally easier to install and remove than dowel pins or spring tension pins.
Metric taper pins have a 1:50 taper which means that for every 50mm in length the diameter increases by 1mm. The nominal size is the diameter of the small end on the pin.
Metric & Multistandard Components Corp. supplies DIN 7977 Externally Threaded Taper Pins and DIN 7978 Internally Threaded Taper Pins.
Metric Threaded Taper Pin Steel DIN258
| D 1 | d | b | d2 | L2 | dp | Z |
|---|---|---|---|---|---|---|
| M5 | 5.0000 | 14.0000 | 5.5000 | 25.0000 | 3.5000 | 1.2500 |
| M6 | 6.0000 | 18.0000 | 6.6000 | 30.0000 | 4.0000 | 1.5000 |
| M8 | 8.0000 | 22.0000 | 8.8000 | 40.0000 | 5.5000 | 2.0000 |
| M10 | 10.0000 | 24.0000 | 10.9000 | 45.0000 | 7.0000 | 2.5000 |
| M12 | 12.0000 | 27.0000 | 13.1000 | 55.0000 | 8.5000 | 3.0000 |
| M12 | 14.0000 | 30.0000 | 15.3000 | 65.0000 | 8.5000 | 3.0000 |
| M16 | 16.0000 | 35.0000 | 17.4000 | 72.0000 | 12.0000 | 4.0000 |
| M16 | 20.0000 | 35.0000 | 21.7000 | 85.0000 | 12.0000 | 4.0000 |
| M20 | 25.0000 | 40.0000 | 27.0000 | 100.0000 | 15.0000 | 5.0000 |
| M24 | 30.0000 | 46.0000 | 32.2000 | 110.0000 | 18.0000 | 6.0000 |
| M30 | 40.0000 | 58.0000 | 42.6000 | 130.0000 | 23.0000 | 7.5000 |
| M36 | 50.0000 | 70.0000 | 53.0000 | 150.0000 | 28.0000 | 9.0000 |
Taper Pin Packaging and Delivery
- Payment Modes: LC (Letter of Credit), TT (Telegraphic Transfer or Wire Transfer), Cheque, and others.
- Packaging: High Tensile Fasteners are packaged with caution and safety so they reach our client’s as good as he would expect. Packaging Charges Extra.
- Port of Dispatch: Mumbai or Kalamboli ports in the Maharashtra state of India.
- Tax: 18% GST
Taper Pin Exporter in Countries
We, Aamaap Fasteners are leading Exporters of Taper Pin in Mumbai, Maharashtra, India. We are Taper Pin exporters in Oman, Taper Pin exporters in Iran, Taper Pin exporters in Kuwait, Taper Pin exporters in Qatar, Taper Pin exporters in china, Taper Pin exporters in UAE, Taper Pin exporters in Africa, Taper Pin exporters in turkey, Taper Pin exporters in Mexico, Taper Pin exporters in Canada, Taper Pin exporters in Malaysia, Taper Pin exporters in Saudi Arabia, Taper Pin exporters in brazil, Taper Pin exporters in the USA, Taper Pin exporters in Sri Lanka, Taper Pin exporters in Australia, Taper Pin exporters in Nigeria and more than 85+ countries. Our main office is located in Mumbai and we supply Taper Pin to all major cities of India from Mumbai.
Manufacturer Exporter of Taper Pin in the following countries:
| Manufacturer Exporter of Taper Pin in the following countries: | |||||
|---|---|---|---|---|---|
| Saudi Arabia | Oman | Kuwait | Netherlands | Iran | |
| Bahrain | Qatar | UAE | Africa | China | |
| Nigeria | Mexico | Canada | Venezuela | United Kingdom | |
| United States | South Africa | Malaysia | Bangladesh | Turkey | |
| Singapore | Sri Lanka | Australia | Brazil | ||
Our Testing Facilities
With the objective of providing the best quality products to our customers and partners, all our products undergo rigorous testing and quality check processes. Our Stainless Steel Fastener plant is equipped with various testing facilities like Tensile Testing Machine, Hardness Test, IGC Test, Positive Material Identification Test .Tensile Testing Machine Test is also known as tension testing. This is a fundamental materials science test in which a sample is subjected to a controlled tension until failure. The results from the test are commonly used to select a material for an application, for quality control, and to predict how a material will react under other types of forces.
Impact Testing Machine is used to test the products ability to resist high rate loading. This is one of the most important tests to understand the strength of the product. We also conduct other tests like Hardness Test, IGC Test, Positive Material Identification Test to ensure that all the product going out of our manufacturing plant are the best in terms of quality. SPC analysis is used as a tool to supervise the ongoing processes. Multi stage inspection and checks are done by a trained and skilled quality assurance and control workforce to ensure that defect free products are delivered to customers
Coated Taper Pin Types
- PTFE Coated Taper Pin manufacturer
- Hot Dip galvanized Taper Pin manufacturer
- Yellow Zinc Plated Taper Pin manufacturer
- Blue Zinc Plated Taper Pin manufacturer
- Black Zinc Plated Taper Pin manufacturer
- Zinc Cobalt Plated Taper Pin manufacturer
- Aluminum Zinc Flake Coated Taper Pin manufacturer
- Black Phosphate Taper Pin manufacturer
- Zinc Plated Taper Pin manufacturer
- Nickel Plated Taper Pin manufacturer
- Chrome Plated Taper Pin manufacturer
- Cadmium Plated Taper Pin manufacturer
- Copper Plated Taper Pin manufacturer
- Silver Plated Taper Pin manufacturer
- Silver Plated Taper Pin manufacturer
- Tin-Plated Taper Pin manufacturer
- Tin-Plated Taper Pin manufacturer
Taper Pin Standards
- German DIN Taper Pin manufacturers
- International ISO Taper Pin manufacturers
- Indian IS Taper Pin manufacturers
- British BS Taper Pin manufacturers
- American ASME Taper Pin manufacturers
- Italian UNI Taper Pin manufacturers
- American SAE Taper Pin manufacturers
- Spanish CSN Taper Pin manufacturers
- Polish PN Taper Pin manufacturers
- European EU Taper Pin manufacturers
Taper Pin Finishes
- Plain Finish Taper Pins: No Coating..
- Zinc Plated Taper Pins: Coated with Zinc.
- Zinc and Chromate Taper Pins: Silvery and offers resistant to corrosion.
- Zinc and Yellow Chromate Taper Pins: Offers better resistant to corrosion.
- Hot Dipped Galvanized(HDG) Taper Pins: Offers superior resistant to corrosion due to the dipping of Taper Pins in the molten zinc.
